Sizes We Build
We manufacture galvanized corrugated steel culvert pipe from 12 inch up to 120 inch, and we stock ADS corrugated HDPE up to 60 inch.
| Diameter | Also called |
|---|---|
| 36 inch culvert pipe | 3 foot |
| 42 inch culvert pipe | 3.5 foot |
| 48 inch culvert pipe | 4 foot |
| 54 inch culvert pipe | 4.5 foot |
| 60 inch culvert pipe | 5 foot |
| 72 inch culvert pipe | 6 foot |
| 84 inch culvert pipe | 7 foot |
| 96 inch culvert pipe | 8 foot |
| 120 inch culvert pipe | 10 foot |
Stock lengths run 16, 20, 25, 30, and 40 feet. We cut to whatever length you need, and depending on diameter we can make up runs as long as 60 feet.
We also carry ADS corrugated HDPE pipe from 6 inch to 60 inch in 20 foot lengths. Above 60 inch, steel is the material.
Need something smaller? See our driveway and ranching culverts.
What Large Culverts Get Used For
- Road and highway crossings
- Bridge and low water crossing replacements
- Creek and drainage channel crossings
- Commercial and industrial site development
- Subdivision and development drainage
- Stormwater management systems
- Ranch and section road crossings
- Detention and retention structures
If loaded trucks or heavy equipment are going over it, corrugated steel is what you want under it.
Custom Fabrication
Big jobs rarely fit a catalog. We fabricate on site:
- Custom lengths, cut to your crossing
- Custom bevels and welded fittings
- Elbows, saddles, reducers, couplers, and tees
- Special sizes outside standard diameters
- Custom pond structures
If you can draw it, we can build it.
End Sections, Bands, and Accessories
We stock flared end sections, bands, and couplers, and fabricate end treatments to match whatever we build. Pipe and parts from one place instead of chasing them separately.
Delivery on Large Pipe
Based in Tuttle, we deliver anywhere in Oklahoma within 24 hours, same day when we can. Large pipe hauls on a flatbed. Tell us the sizes and the delivery location and we will quote freight along with the pipe.
Picking up? Large diameter pipe needs a trailer or flatbed. We will load you, but bring your own straps.
Large Culverts, Large Tinhorns
Depending on where in Oklahoma you are from, you might call it a culvert, a tinhorn, or a whistle. Same thing. Ask us for a large tinhorn and we will know exactly what you are after.
Why Contractors Buy Large Culvert Pipe From Us
- We manufacture it, so we are not waiting on a distributor
- Largest on-site inventory in Oklahoma
- 12 inch to 120 inch, cut to length
- Custom fabrication on site
- Statewide delivery within 24 hours
- Wholesale pricing, no minimum order
Get a Quote
Prices move with the steel market, so we quote by the job. Call (405) 381-4044 with the diameter, the length, and where it is going.
We are a supplier, so you or your contractor handles the install. Our installation guidelines cover sizing, slope, bedding, backfill, and cover, and our FAQ answers what we get asked most.